Introduction
============

A firmware Sketch for the Keyboardio Model 01.  Based algerno's:
https://git.madhouse-project.org/algernon/Model01-Sketch#base-layer


Build
=====

On Debian systems, the following packages are required:

    - avr-libc
    - avrdude
    - binutils-avr
    - gcc-avr
    - arduino-mk

Running `apt install arduino-mk` should pull in all required
dependencies.  Moreover Arduino 1.6.7 or newer is required.
Unfortunately, as of 2019-06-25 the version found in Debian sid is too
Unfortunately, as of 2019-06-25 the version found in Debian sid is too
old (cf. #780706, #925578, #927329).  Dowload a recent version at
https://www.arduino.cc and it unpack to /usr/local/arduino.

Initialize (or update) submodules:

    ~$ git submodule update --init \
            lib/hardware/keyboardio

    ~$ git -C lib/hardware/keyboardio submodule update --init --recursive \
            "avr/bootloaders/*" \
            "avr/libraries/Kaleidoscope" \
            "avr/libraries/Kaleidoscope-HIDAdaptor-KeyboardioHID" \
            "avr/libraries/Keyboardio*"

    ~$ make


Flash firmware
==============

    ~$ make upload

Press down the 'prog' key while the board is rebooting.  You can release
it once it glows red.