pullimap.md: Fix pandoc syntax.

1 files changed, 107 insertions, 109 deletions

diff --git a/pullimap.md b/pullimap.md
index 54c6ce5..494bfae 100644
--- a/pullimap.md
+++ b/pullimap.md
@@ -32,44 +32,44 @@ Options
 
 `--config=`*FILE*
 
-: Specify an alternate configuration file.  Relative paths start from
-  *$XDG_CONFIG_HOME*, or *~/.config* if the `XDG_CONFIG_HOME`
-  environment variable is unset.
+:   Specify an alternate configuration file.  Relative paths start from
+    *$XDG_CONFIG_HOME*, or *~/.config* if the `XDG_CONFIG_HOME`
+    environment variable is unset.
 
 `--idle`[`=`*seconds*]
 
-: Don't exit after a successful poll.  Instead, keep the connection open
-  and issue `IDLE` commands (require an IMAP server supporting [RFC
-  2177]) to watch for updates in the mailbox.  This also enables
-  `SO_KEEPALIVE` on the socket.  Each `IDLE` command is terminated after
-  at most *seconds* (29 minutes by default) to avoid being logged out
-  for inactivity.
+:   Don't exit after a successful poll.  Instead, keep the connection open
+    and issue `IDLE` commands (require an IMAP server supporting [RFC
+    2177]) to watch for updates in the mailbox.  This also enables
+    `SO_KEEPALIVE` on the socket.
+    Each `IDLE` command is terminated after at most *seconds* (29
+    minutes by default) to avoid being logged out for inactivity.
 
 `--no-delivery`
 
-: Update the *statefile*, but skip SMTP/LMTP delivery.  This is mostly
-  useful for initializing the *statefile* when migrating to
-  `pullimap` from another similar program such as [`fetchmail`(1)] or
-  [`getmail`(1)].
+:   Update the *statefile*, but skip SMTP/LMTP delivery.  This is mostly
+    useful for initializing the *statefile* when migrating to `pullimap`
+    from another similar program such as [`fetchmail`(1)] or
+    [`getmail`(1)].
 
 `-q`, `--quiet`
 
-: Try to be quiet.
+:   Try to be quiet.
 
 `--debug`
 
-: Turn on debug mode.  Debug messages are written to the error output.
-  Note that this include all IMAP traffic (except literals).  Depending
-  on the chosen authentication mechanism, this might include
-  authentication credentials.
+:   Turn on debug mode.  Debug messages are written to the error output.
+    Note that this include all IMAP traffic (except literals).
+    Depending on the chosen authentication mechanism, this might include
+    authentication credentials.
 
 `-h`, `--help`
 
-: Output a brief help and exit.
+:   Output a brief help and exit.
 
 `--version`
 
-: Show the version number and exit.
+:   Show the version number and exit.
 
 
 Configuration file
@@ -86,158 +86,156 @@ Valid options are:
 
 *statefile*
 
-: State file to use to keep track of the *mailbox*'s `UIDVALIDITY` and
-  `UIDNEXT` values.  Relative paths start from
-  *$XDG_DATA_HOME/pullimap*, or *~/.local/share/pullimap* if the
-  `XDG_DATA_HOME` environment variable is unset.
-  (Default: the parent section name of the option.)
+:   State file to use to keep track of the *mailbox*'s `UIDVALIDITY` and
+    `UIDNEXT` values.  Relative paths start from
+    *$XDG_DATA_HOME/pullimap*, or *~/.local/share/pullimap* if the
+    `XDG_DATA_HOME` environment variable is unset.
+    (Default: the parent section name of the option.)
 
 *mailbox*
 
-: The IMAP mailbox to pull messages from.
-  Support for persistent message Unique Identifiers (UID) is required.
-  (Default: `INBOX`.)
+:   The IMAP mailbox to pull messages from.  Support for persistent
+    message Unique Identifiers (UID) is required.  (Default: `INBOX`.)
 
 *deliver-method*
 
-: `PROTOCOL:[ADDRESS]:PORT` where to deliver messages.  Both [SMTP][RFC
-  5321] and [LMTP][RFC 2033] servers are supported, and [SMTP
-  pipelining][RFC 2920] is used when possible.
-  (Default: `smtp:[127.0.0.1]:25`.)
+:   `PROTOCOL:[ADDRESS]:PORT` where to deliver messages.  Both
+    [SMTP][RFC 5321] and [LMTP][RFC 2033] servers are supported, and
+    [SMTP pipelining][RFC 2920] is used when possible.
+    (Default: `smtp:[127.0.0.1]:25`.)
 
 *deliver-ehlo*
 
-: Hostname to use in `EHLO` or `LHLO` commands.
-  (Default: `localhost.localdomain`.)
+:   Hostname to use in `EHLO` or `LHLO` commands.
+    (Default: `localhost.localdomain`.)
 
 *deliver-rcpt*
 
-: Message recipient.
-  (Default: the username associated with the effective uid of the
-  `pullimap` process.)
+:   Message recipient.
+    (Default: the username associated with the effective uid of the
+    `pullimap` process.)
 
 *purge-after*
 
-: Retention period (in days), after which messages are removed from the
-  IMAP server.  (The value is at best 24h accurate due to the IMAP
-  `SEARCH` criterion ignoring time and timezone.)
-  If *purge-after* is set to `0` then messages are deleted immediately
-  after delivery.  Otherwise `pullimap` issues an IMAP `SEARCH` command
-  to list old messages; if `--idle` is set then the `SEARCH` command is
-  issued again every 12 hours.
+:   Retention period (in days), after which messages are removed from
+    the IMAP server.  (The value is at best 24h accurate due to the IMAP
+    `SEARCH` criterion ignoring time and timezone.)
+    If *purge-after* is set to `0` then messages are deleted immediately
+    after delivery.  Otherwise `pullimap` issues an IMAP `SEARCH`
+    command to list old messages; if `--idle` is set then the `SEARCH`
+    command is issued again every 12 hours.
 
 *type*
 
-: One of `imap`, `imaps` or `tunnel`.
-  `type=imap` and `type=imaps` are respectively used for IMAP and IMAP
-  over SSL/TLS connections over a INET socket.
-  `type=tunnel` causes `pullimap` to open a pipe to a *command* instead
-  of a raw socket.
-  (Default: `imaps`.)
+:   One of `imap`, `imaps` or `tunnel`.
+    `type=imap` and `type=imaps` are respectively used for IMAP and IMAP
+    over SSL/TLS connections over a INET socket.
+    `type=tunnel` causes `pullimap` to open a pipe to a *command*
+    instead of a raw socket.
+    (Default: `imaps`.)
 
 *host*
 
-: Server hostname, for `type=imap` and `type=imaps`.
-  (Default: `localhost`.)
+:   Server hostname, for `type=imap` and `type=imaps`.
+    (Default: `localhost`.)
 
 *port*
 
-: Server port.
-  (Default: `143` for `type=imap`, `993` for
-  `type=imaps`.)
+:   Server port.
+    (Default: `143` for `type=imap`, `993` for `type=imaps`.)
 
 *proxy*
 
-: An optional SOCKS proxy to use for TCP connections to the IMAP server
-  (`type=imap` and `type=imaps` only), formatted as
-  `PROTOCOL://[USER:PASSWORD@]PROXYHOST[:PROXYPORT]`.
-  If `PROXYPORT` is omitted, it is assumed at port 1080.
-  Only [SOCKSv5][RFC 1928] is supported (with optional
-  [username/password authentication][RFC 1929]), in two flavors:
-  `socks5://` to resolve *hostname* locally, and `socks5h://` to let the
-  proxy resolve *hostname*.
+:   An optional SOCKS proxy to use for TCP connections to the IMAP
+    server (`type=imap` and `type=imaps` only), formatted as
+    `PROTOCOL://[USER:PASSWORD@]PROXYHOST[:PROXYPORT]`.
+    If `PROXYPORT` is omitted, it is assumed at port 1080.
+    Only [SOCKSv5][RFC 1928] is supported (with optional
+    [username/password authentication][RFC 1929]), in two flavors:
+    `socks5://` to resolve *hostname* locally, and `socks5h://` to let
+    the proxy resolve *hostname*.
 
 *command*
 
-: Command to use for `type=tunnel`.  Must speak the [IMAP4rev1
-  protocol][RFC 3501] on its standard output, and understand it on its
-  standard input.
+:   Command to use for `type=tunnel`.  Must speak the [IMAP4rev1
+    protocol][RFC 3501] on its standard output, and understand it on its
+    standard input.
 
 *STARTTLS*
 
-: Whether to use the [`STARTTLS`][RFC 2595] directive to upgrade to a
-  secure connection.  Setting this to `YES` for a server not advertising
-  the `STARTTLS` capability causes `pullimap` to immediately abort the
-  connection.
-  (Ignored for *type*s other than `imap`.  Default: `YES`.)
+:   Whether to use the [`STARTTLS`][RFC 2595] directive to upgrade to a
+    secure connection.  Setting this to `YES` for a server not
+    advertising the `STARTTLS` capability causes `pullimap` to
+    immediately abort the connection.
+    (Ignored for *type*s other than `imap`.  Default: `YES`.)
 
 *auth*
 
-: Space-separated list of preferred authentication mechanisms.
-  `pullimap` uses the first mechanism in that list that is also
-  advertised (prefixed with `AUTH=`) in the server's capability list.
-  Supported authentication mechanisms are `PLAIN` and `LOGIN`.
-  (Default: `PLAIN LOGIN`.)
+:   Space-separated list of preferred authentication mechanisms.
+    `pullimap` uses the first mechanism in that list that is also
+    advertised (prefixed with `AUTH=`) in the server's capability list.
+    Supported authentication mechanisms are `PLAIN` and `LOGIN`.
+    (Default: `PLAIN LOGIN`.)
 
 *username*, *password*
 
-: Username and password to authenticate with.  Can be required for non
-  pre-authenticated connections, depending on the chosen authentication
-  mechanism.
+:   Username and password to authenticate with.  Can be required for non
+    pre-authenticated connections, depending on the chosen
+    authentication mechanism.
 
 *compress*
 
-: Whether to use the [`IMAP COMPRESS` extension][RFC 4978] for servers
-  advertising it.  (Default: `YES`.)
+:   Whether to use the [`IMAP COMPRESS` extension][RFC 4978] for servers
+    advertising it.  (Default: `YES`.)
 
 *null-stderr*
 
-: Whether to redirect *command*'s standard error to `/dev/null` for type
-  `type=tunnel`.  (Default: `NO`.)
+:   Whether to redirect *command*'s standard error to `/dev/null` for
+    type `type=tunnel`.  (Default: `NO`.)
 
 *SSL_protocols*
 
-: A space-separated list of SSL protocols to enable or disable (if
-  prefixed with an exclamation mark `!`.  Known protocols are
-  `SSLv2`, `SSLv3`, `TLSv1`, `TLSv1.1`, and `TLSv1.2`.  Enabling a
-  protocol is a short-hand for disabling all other protocols.
-  (Default: `!SSLv2 !SSLv3`, i.e., only enable TLSv1 and above.)
+:   A space-separated list of SSL protocols to enable or disable (if
+    prefixed with an exclamation mark `!`.  Known protocols are `SSLv2`,
+    `SSLv3`, `TLSv1`, `TLSv1.1`, and `TLSv1.2`.  Enabling a protocol is
+    a short-hand for disabling all other protocols.
+    (Default: `!SSLv2 !SSLv3`, i.e., only enable TLSv1 and above.)
 
 *SSL_cipher_list*
 
-: The cipher list to send to the server.  Although the server determines
-  which cipher suite is used, it should take the first supported cipher
-  in the list sent by the client.  See [`ciphers`(1ssl)] for more
-  information.
+:   The cipher list to send to the server.  Although the server
+    determines which cipher suite is used, it should take the first
+    supported cipher in the list sent by the client.  See
+    [`ciphers`(1ssl)] for more information.
 
 *SSL_fingerprint*
 
-: Fingerprint of the server certificate (or its public key) in the form
-  `ALGO$DIGEST_HEX`, where `ALGO` is the used algorithm (default
-  `sha256`).
-  Attempting to connect to a server with a non-matching certificate
-  fingerprint causes `pullimap` to abort the connection during the
-  SSL/TLS handshake.
+:   Fingerprint of the server certificate (or its public key) in the
+    form `ALGO$DIGEST_HEX`, where `ALGO` is the used algorithm (default
+    `sha256`).
+    Attempting to connect to a server with a non-matching certificate
+    fingerprint causes `pullimap` to abort the connection during the
+    SSL/TLS handshake.
 
 *SSL_verify*
 
-: Whether to verify the server certificate chain.
-  Note that using *SSL_fingerprint* to specify the fingerprint of the
-  server certificate is an orthogonal authentication measure as it
-  ignores the CA chain.
-  (Default: `YES`.)
+:   Whether to verify the server certificate chain.
+    Note that using *SSL_fingerprint* to specify the fingerprint of the
+    server certificate is an orthogonal authentication measure as it
+    ignores the CA chain.
+    (Default: `YES`.)
 
 *SSL_CApath*
 
-: Directory to use for server certificate verification if
-  `SSL_verify=YES`.
-  This directory must be in “hash format”, see [`verify`(1ssl)] for
-  more information.
+:   Directory to use for server certificate verification if
+    `SSL_verify=YES`.
+    This directory must be in “hash format”, see [`verify`(1ssl)] for
+    more information.
 
 *SSL_CAfile*
 
-: File containing trusted certificates to use during server certificate
-  authentication if `SSL_verify=YES`.
+:   File containing trusted certificates to use during server
+    certificate authentication if `SSL_verify=YES`.
 
 Control flow
 ============