aboutsummaryrefslogtreecommitdiffstats
path: root/Changelog
Commit message (Collapse)AuthorAgeFiles
...
* pullimap: Fix mangling of data lines starting with a dot.Guilhem Moulin2019-11-181
| | | | | | | Some LMTP servers, Dovecot's in particular, trims leading dots that are not doubled (e.g. “.foo” would become “foo”). In RFC 5322 sec. 4.5.2 explicitly says that when an RFC 5322 line starts with a '.', the character needs to be doubled.
* pullimap: Treat messages with a NIL RFC822 attribute as empty.Guilhem Moulin2019-11-181
|
* interimap: Gracefully ignore messages with NIL RFC822 attribute.Guilhem Moulin2019-11-171
| | | | | | Like we do for zero-length messages. Closes: #944812.
* Avoid sending large UID EXPUNGE|FETCH|STORE and APPEND commands.Guilhem Moulin2019-11-131
| | | | | | | | | | | | | | | | | | | | | | UID EXPUNGE|FETCH|STORE commands are now split into multiple (sequential) commands when their set representation exceeds 4096 bytes in size. Without splitting logic set representations could grow arbitrarily large, and exceed the server's maximum command size. This adds roundtrips which could be eliminated by pipelining, but it's unlikely to make any difference in typical synchronization work. While set representations seem to remain small in practice, they might grow significantly if many non-contiguous UIDs were flagged and/or expunged, and later synchronized at once. Furthermore, for MULTIAPPEND-capable servers, the number of messages is limited to 128 per APPEND command (also subject to a combined literal size of 1MiB like before). These numbers are currently not configurable. They're intentionally lower than Dovecot's default maximum command size (64k) in order to avoid a deadlock situation after sending 8k-long commands under COMPRESS=DEFLATE: https://dovecot.org/pipermail/dovecot/2019-November/117522.html .
* Net::IMAP::InterIMAP::push_flag_updates() bugfixes.Guilhem Moulin2019-11-131
| | | | | | | | | | | | | | The UNCHANGEDSINCE test from the CONDSTORE extension was incorrectly placed after the flag list in UID STORE commands. In practice this meant the server didn't add the MODIFIED code when needed. The server won't send an untagged FETCH command (and won't increase the message's MODSEQ) if no change was made to the flag list. A panic() was incorrectly triggered in that case. When the flag list was set (by another client) to a superset of the UID STORE command currently processed, the extra flags were not synchronized. Cf. RFC 7162 sec. 3.1.3 ex. 10.
* interimap: raise SELECT sample set size from 64 to 256 bytes.Guilhem Moulin2019-11-131
| | | | | | | | | | | | | | A n-bytes set covers at least ⌊(n+1)/11⌋ UIDs (UIDs are at most 10 bytes of size), hence 23 UIDs for 256 bytes long sets. However we exceed it by another range, so in the worst case (if the the higher UIDs are sparse) we'll sample ⌊(n+1)/11+1⌋ UIDs: 1000000000,1000000002,1000000004,…,1000000046 This was 6 UIDs for n=64 which is a tad low; this is now raised to 24 UIDs. The actual set size returned by sample() is of max size n+22 bytes (extra "$UID1:$UID2," where $UID1 and $UID2 are both ≥10⁹).
* Test suite: add new tests for SSL/TLS.Guilhem Moulin2019-11-131
| | | | | SSL connections are accepted on TCP port 10993. Also, fix STARTTLS directive, broken since fba1c36…
* libinterimap: honor compress={Yes/No}.Guilhem Moulin2019-11-081
|
* Refactor logging logic.Guilhem Moulin2019-11-071
| | | | | | | Also, introduce new option 'logger-prefix' to determine the prefix of each log line. Closes: #942725.
* libinterimap: Don't panic at the end of the compressed stream.Guilhem Moulin2019-11-071
| | | | | Cf. Compress::Raw::Zlib's documentation. Z_STREAM_END denotes a successful state.
* pullimap, interimap: redact AUTHENTICATE and LOGIN commandsGuilhem Moulin2019-11-061
| | | | | | In --debug mode in order to avoid inadvertently receiving credentials in bug reports. --debug can be set twice to spell out these commands in full.
* libinterimap: use directories relative to $HOME for the XDG defaults.Guilhem Moulin2019-07-081
| | | | | | | | | | | | Previously getpwuid() was called to determine the user's home directory, while the XDG specification explicitely mentions $HOME. Conveniently our docs always mentioned ~/, which on POSIX-compliant systems expands to the value of the variable HOME (and the result is unspecified when the variable is unset). Cf. Shell and Utilities volume of POSIX.1-2017, sec. 2.6.1: https://pubs.opengroup.org/onlinepubs/9699919799/utilities/V3_chap02.html#tag_18_06_01
* interimap: clarify that 'ignore-mailbox' is matched against internal names.Guilhem Moulin2019-07-071
| | | | | | | That is, without leading reference, and where the hierarchy delimiter is replaced with null characters. /!\ This changes breaks backward compatibility!
* Refactor documentation.Guilhem Moulin2019-07-051
| | | | | In particular, move manpages to the 'doc' directory, and generate HTML documentation with `make html`.
* Improve wording.Guilhem Moulin2019-05-301
|
* typo fixesGuilhem Moulin2019-05-281
|
* Manpages: clarify that the tunnel command is run following Perl's `exec` ↵Guilhem Moulin2019-05-271
| | | | | | | | | | | | semantics. It is passed to `/bin/sh -c` when it contains shell metacharacters; and split into words and passed to execvp(3) otherwise. https://perldoc.perl.org/functions/exec.html (Since c8fb54897f046a5a3fb4c1d45dc21fd8bcd882e3 the value no longer needs to stard with a forward slash.)
* Add test-suite (requires dovecot-imapd).Guilhem Moulin2019-05-271
|
* New option 'list-reference' to specify a reference name.Guilhem Moulin2019-05-271
| | | | | | | | This is useful for synchronizing multiple remote servers against different namespaces belonging to the same local IMAP server (using a different InterIMAP instance for each local namespace ↔ remote synchronization, for instance with the newy provided systemd template unit file).
* libinterimap: use socketpair(2) in tunnel mode.Guilhem Moulin2019-05-271
| | | | | | Rather than two pipe(2). Also, use SOCK_CLOEXEC to save a fcntl() call when setting the close-on-exec flag on the socket (even though Perl will likely call fcntl() anyway).
* interimap: fix handling of mod-sequence values greater or equal than 2 << 63.Guilhem Moulin2019-05-271
| | | | | | | | | | | | | | | SQLite processes every INTEGER values as a 8-byte signed integer, so we need to manually do the conversion from/to uint64_t client-side if we don't want to overflow or receive floats. https://www.sqlite.org/datatype3.html#storage_classes_and_datatypes http://jakegoulding.com/blog/2011/02/06/sqlite-64-bit-integers/ We could also do the same trick for local/remote UIDs, UIDVALITY and UIDNEXT values to slim the database down at the expense of pre/post- processing. (Values of SQLite's INTEGER class are 1, 2, 3, 4, 6, or 8 bytes signed integers depending on the manitudes, so we could save some space for values ≥2³¹.) But that seems a little overkill.
* interimap: Enforce SQLite foreign key constraints.Guilhem Moulin2019-05-271
| | | | | | | | Setting the 'foreign_keys' PRAGMA during a multi-statement transaction (when SQLite is not in autocommit mode) is a no-op. https://www.sqlite.org/pragma.html#pragma_foreign_keys https://www.sqlite.org/foreignkeys.html#fk_enable
* interimap: avoid caching hierarchy delimiters forever in the database.Guilhem Moulin2019-05-271
| | | | | | | | | | | | | | | | | | | | Following recommendation from https://www.imapwiki.org/ClientImplementation/MailboxList#Hierarchy_separators Instead, use null characters internally, and substitute them with the local and remote hierarchy delimiters (which thus no longer need to match) for IMAP commands. This require a database schema upgrade to alter the mailbox name column type from TEXT to BLOB. We're using SQLite's user_version PRAGMA to keep track of schema version; beware that `.dump` doesn't export its value! In logging messages, local and remote mailbox names are shown as is (with their respective delimiters) while database mailbox names are shown by replacing null characters with the *local* hierarchy delimiter. Moreover for mailbox names specified on the command line or the configuration file (with the "list-mailbox" option) the *local* hierarchy delimiter should be used.
* interimap: Refactor --target handling.Guilhem Moulin2019-05-271
| | | | Also, accept comma-separated values for --target.
* interimap: fail when two non-INBOX LIST replies return different separators.Guilhem Moulin2019-05-271
| | | | | | This never happens for a single LIST command, but may happen if mailboxes from different namespaces are being listed. The workaround here is to run a new interimap instance for each namespace.
* interimap: accept C-style escape sequences in 'list-mailbox'.Guilhem Moulin2019-05-271
| | | | | This is useful for defining names containing control characters (incl. \0 for unspecified hierarchy delimiter).
* interimap: Factor out error throwing.Guilhem Moulin2019-05-271
| | | | Also, write which --target to use in --delete command suggestions.
* libinterimap: astring is 1*ASTRING-CHAR / string.Guilhem Moulin2019-05-271
| | | | | | | | | | | | | | | Not 1*ATOM-CHAR / string. Also accept LIST responses mailbox names containing '%', '*', or ']'. From RFC 3501: astring = 1*ASTRING-CHAR / string ASTRING-CHAR = ATOM-CHAR / resp-specials list = "LIST" SP mailbox SP list-mailbox list-mailbox = 1*list-char / string list-char = ATOM-CHAR / list-wildcards / resp-specials list-wildcards = "%" / "*" resp-specials = "]"
* libinterimap: quote() the empty string as "" instead of a 0-length literal.Guilhem Moulin2019-05-271
| | | | | Compression asside, this saves 3 bytes and one round-trip on servers not supporting non-synchronizing literals, and 4 bytes otherwise.
* libinterimap: bugfix: fix escaped hierarchy delimiters in LIST reponses.Guilhem Moulin2019-05-271
| | | | | The were returned as escaped quoted specials, like "\\", not as a single character (backslash in this case).
* Prepare new release.upstream/0.4Guilhem Moulin2019-01-221
|
* Change e-mail address.Guilhem Moulin2019-01-221
|
* Net::IMAP::InterIMAP: add support for TLSv1.3 (on recent enough Net::SSLeay).Guilhem Moulin2019-01-221
| | | | | | | Also, change "SSL_protocols" default value from "!SSLv2 !SSLv3" to "!SSLv2 !SSLv3 !TLSv1 !TLSv1.1". I.e., only enable TLSv1.2 and later, which is the default in Debian's OpenSSL as of 1.1.1-2, cf. https://tracker.debian.org/news/998835/accepted-openssl-111-2-source-into-unstable/ .
* pullimap, interimap: don't autocreate statefile or database in long-lived mode.Guilhem Moulin2019-01-211
|
* interimap.service: use --watch=60 rather than --notify.Guilhem Moulin2019-01-201
|
* Specify minimum Perl and Net::SSLeay versions.Guilhem Moulin2019-01-201
|
* pullimap, interimap: Use $XDG_CONFIG_HOME/$NAME/config as config file.Guilhem Moulin2019-01-201
|
* pullimap: use extended SEARCH (RFC 4731) when availableGuilhem Moulin2018-05-101
|
* Improve wording.Guilhem Moulin2018-05-091
|
* Add support for untagged ESEARCH responses from RFC 4731.Guilhem Moulin2018-05-091
|
* Library: new API idle_start() and idle_stop().Guilhem Moulin2018-05-091
|
* Fix manpage generation with pandoc >=2.1Guilhem Moulin2018-04-261
|
* Add missing changelog entry.Guilhem Moulin2017-07-291
|
* Ensure the lower bound of UID ranges is at least 1.Guilhem Moulin2017-05-291
|
* pullimap: replace non RFC 5321-compliant envelope sender addresses by <>.Guilhem Moulin2016-12-061
|
* Update changelog.Guilhem Moulin2016-12-011
|
* pullimap: add a manpage and a configuration file.Guilhem Moulin2016-03-071
|
* Add an option 'SSL_protocols'.Guilhem Moulin2015-10-191
|
* Fix byte count for compression streams.Guilhem Moulin2015-10-061
|
* Bump version number.Guilhem Moulin2015-09-281
|