From 7f15c76976dc76b580a2e182ad1538cd6359f926 Mon Sep 17 00:00:00 2001 From: Guilhem Moulin Date: Fri, 11 Mar 2016 19:32:05 +0100 Subject: interimap: convert manpage to markdown. --- interimap.md | 472 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 472 insertions(+) create mode 100644 interimap.md (limited to 'interimap.md') diff --git a/interimap.md b/interimap.md new file mode 100644 index 0000000..671fbb8 --- /dev/null +++ b/interimap.md @@ -0,0 +1,472 @@ +% intermap(1) +% [Guilhem Moulin](mailto:guilhem@fripost.org) +% July 2015 + +Name +==== + +InterIMAP - Fast bidirectional synchronization for QRESYNC-capable IMAP servers + +Synopsis +======== + +`interimap` [*OPTION* ...] [*COMMAND*] [*MAILBOX* ...] + +Description +=========== + +`interimap` performs stateful synchronization between two IMAP4rev1 +servers. +Such synchronization is made possible by the [`QRESYNC` IMAP +extension][RFC 7162]; for convenience reasons servers must also support +the [`LIST-EXTENDED`][RFC 5258], [`LIST-STATUS`][RFC 5819] and +[`UIDPLUS`][RFC 4315] IMAP extensions. +See also the **[supported extensions]** section below. + +Stateful synchronization is only possible for mailboxes supporting +persistent message Unique Identifiers (UID) and persistent storage of +mod-sequences (MODSEQ); any non-compliant mailbox will cause `interimap` +to abort. +Furthermore, because UIDs are allocated not by the client but by the +server, `interimap` needs to keep track of associations between local +and remote UIDs for each mailbox. +The synchronization state of a mailbox consists of its `UIDNEXT` and +`HIGHESTMODSEQ` values on each server; it is then assumed that each +message with UID smaller than `UIDNEXT` have been replicated to the +other server, and that the metadata (such as flags) of each message with +MODSEQ at most `HIGHESTMODSEQ` have been synchronized. +Conceptually, the synchronization algorithm is derived from [RFC 4549] +with the [RFC 7162] (section 6) amendments, and works as follows: + + 1. `SELECT` (on both servers) a mailbox the current `UIDNEXT` or `HIGHESTMODSEQ` + values of which differ from the values found in the database (for + either server). Use the `QRESYNC` `SELECT` parameter from [RFC + 7162] to list changes (vanished messages and flag updates) since + `HIGHESTMODSEQ` to messages with UID smaller than `UIDNEXT`. + + 2. Propagate these changes onto the other server: get the corresponding + UIDs from the database, then: + a. issue an `UID STORE` command, followed by `UID EXPUNGE`, to + remove messages that have not already been deleted on both + servers; and + b. issue some `UID STORE` commands to propagate flag updates (send + a single command for each flag list in order the reduce the + number of round trips). + + (Conflicts may occur if the metadata of a message has been updated + on both servers with different flag lists; in that case, `interimap` + issues a warning and updates the message on each server with the + union of both flag lists.) + Repeat this step if the server sent some updates in the meantime. + Otherwise, update the `HIGHESTMODSEQ` value in the database. + + 3. Process new messages (if the current `UIDNEXT` value of the mailbox + differs from the one found in the database) by issuing an `UID + FETCH` command; process each received message on-the-fly by issuing + an `APPEND` command with the message's `RFC822` body, `FLAGS` and + `INTERNALDATE`. + Repeat this step if the server received new messages in the + meantime. Otherwise, update the `UIDNEXT` value in the database. + Go back to step 2 if the server sent some metadata (such as flag) + updates in the meantime. + + 4. Go back to step 1 to proceed with the next unsynchronized mailbox. + +Commands +======== + +By default, `interimap` synchronizes each mailbox listed by the `LIST "" +"*"` IMAP command; +the *list-mailbox*, *list-select-opts* and *ignore-mailbox* options from +the [configuration file] can be used to shrink that list and save +bandwidth. +However if some extra argument are provided on the command line, +`interimap` ignores said options and synchronizes the given +*MAILBOX*es instead. Note that each *MAILBOX* is taken “as is”; in +particular, it must be [UTF-7 encoded][RFC 2152], unquoted, and the list +wildcards ‘\*’ and ‘%’ are not interpolated. + +If the synchronization was interrupted during a previous run while some +messages were being replicated (but before the `UIDNEXT` or +`HIGHESTMODSEQ` values have been updated), `interimap` performs a “full +synchronization” on theses messages: downloading the whole UID and flag +lists on each servers allows `interimap` to detect messages that have +been removed or for which their flags have changed in the meantime. +Finally, after propagating the offline changes for these messages, +`interimap` resumes the synchronization for the rest of the mailbox. + +Specifying one of the commands below makes `interimap` perform an action +other than the default [`QRESYNC`][RFC 7162]-based synchronization. + +`--repair` [*MAILBOX* ...] + +: List the database anomalies and try to repair them. (Consider only + the given *MAILBOX*es if non-optional arguments are provided.) + This is done by performing a so-called “full synchronization”, + namely: + 1/ download all UIDs along with their flag list both from the + local and remote servers; + 2/ ensure that each entry in the database corresponds to an + existing UID; and + 3/ ensure that both flag lists match. + Any message found on a server but not in the database is replicated + on the other server (which in the worst case, might lead to a + message duplicate). + Flag conflicts are solved by updating each message to the union of + both lists. + +`--delete` *MAILBOX* [*MAILBOX* ...] + +: Delete the given *MAILBOX*es on each target (by default each server + plus the database, unless `--target` specifies otherwise) where it + exists. + Note that per the [IMAP4rev1 standard][RFC 3501] deletion is not + recursive. Thus *MAILBOX*'s children are not deleted. + +`--rename` *SOURCE* *DEST* + +: Rename the mailbox *SOURCE* to *DEST* on each target (by default + each server plus the database, unless `--target` specifies + otherwise) where it exists. + `interimap` aborts if *DEST* already exists on either target. + Note that per the [IMAP4rev1 standard][RFC 3501] renaming is + recursive. Thus *SOURCE*'s children are moved to become *DEST*'s + children instead. + +Options +======= + +`--config=`*FILE* + +: Specify an alternate [configuration file]. Relative paths start + from *$XDG_CONFIG_HOME*, or *~/.config* if the `XDG_CONFIG_HOME` + environment variable is unset. + +`--target={local,remote,database}` + +: Limit the scope of a `--delete` or `--rename` command to the given + target. Can be repeated to act on multiple targets. By default all + three targets are considered. + +`--watch`[`=`*seconds*] + +: Don't exit after a successful synchronization. Instead, keep + synchronizing forever. Sleep for the given number of *seconds* (1 + minute by default) between two synchronizations. + +`-q`, `--quiet` + +: Try to be quiet. + +`--debug` + +: Turn on debug mode. Debug messages are written to the given *logfile*. + Note that this include all IMAP traffic (except literals). + Depending on the chosen authentication mechanism, this might include + authentication credentials. + +`-h`, `--help` + +: Output a brief help and exit. + +`--version` + +: Show the version number and exit. + +Configuration file +================== + +Unless told otherwise by the `--config=FILE` option, `interimap` reads +its configuration from *$XDG_CONFIG_HOME/interimap* (or +*~/.config/interimap* if the `XDG_CONFIG_HOME` environment variable is +unset) as an [INI file]. +The syntax of the configuration file is a series of `OPTION=VALUE` +lines organized under some `[SECTION]`; lines starting with a ‘#’ or +‘;’ character are ignored as comments. +The `[local]` and `[remote]` sections define the two IMAP servers to +synchronize. +Valid options are: + +*database* + +: SQLite version 3 database file to use to keep track of associations + between local and remote UIDs, as well as the `UIDVALIDITY`, + `UIDNEXT` and `HIGHESTMODSEQ` of each known mailbox on both servers. + Relative paths start from *$XDG_DATA_HOME/interimap*, or + *~/.local/share/interimap* if the `XDG_DATA_HOME` environment + variable is unset. This option is only available in the default + section. + (Default: `HOST.db`, where *HOST* is taken from the `[remote]` or + `[local]` sections, in that order.) + +*list-mailbox* + +: A space separated list of mailbox patterns to use when issuing the + initial `LIST` command (overridden by the *MAILBOX*es given as + command-line arguments). + Note that each pattern containing special characters such as spaces + or brackets (see [RFC 3501] for the exact syntax) must be quoted. + Furthermore, non-ASCII names must be [UTF-7 encoded][RFC 2152]. + Two wildcards are available: a ‘\*’ character matches zero or more + characters, while a ‘%’ character matches zero or more characters up + to the mailbox's hierarchy delimiter. + This option is only available in the default section. + (The default pattern, `*`, matches all visible mailboxes on the + server.) + +*list-select-opts* + +: An optional space separated list of selectors for the initial `LIST` + command. (Requires a server supporting the [`LIST-EXTENDED` IMAP + extension][RFC 5258].) Useful values are `SUBSCRIBED` (to list only + subscribed mailboxes), `REMOTE` (to also list remote mailboxes on a + server supporting mailbox referrals), and `RECURSIVEMATCH` (to + list parent mailboxes with children matching one of the above + *list-mailbox* patterns). This option is only available in the + default section. + +*ignore-mailbox* + +: An optional Perl Compatible Regular Expressions ([PCRE]) covering + mailboxes to exclude: any ([UTF-7 encoded][RFC 2152] and unquoted) + mailbox listed in the initial `LIST` responses is ignored if it + matches the given expression. + Note that the *MAILBOX*es given as command-line arguments bypass the + check and are always considered for synchronization. This option is + only available in the default section. + +*logfile* + +: A file name to use to log debug and informational messages. (By + default these messages are written to the error output.) This + option is only available in the default section. + +*type* + +: One of `imap`, `imaps` or `tunnel`. + `type=imap` and `type=imaps` are respectively used for IMAP and IMAP + over SSL/TLS connections over a INET socket. + `type=tunnel` causes `interimap` to open a pipe to a *command* + instead of a raw socket. + Note that specifying `type=tunnel` in the `[remote]` section makes + the default *database* to be `localhost.db`. + (Default: `imaps`.) + +*host* + +: Server hostname, for `type=imap` and `type=imaps`. + (Default: `localhost`.) + +*port* + +: Server port. + (Default: `143` for `type=imap`, `993` for `type=imaps`.) + +*proxy* + +: An optional SOCKS proxy to use for TCP connections to the IMAP + server (`type=imap` and `type=imaps` only), formatted as + `PROTOCOL://[USER:PASSWORD@]PROXYHOST[:PROXYPORT]`. + If `PROXYPORT` is omitted, it is assumed at port 1080. + Only [SOCKSv5][RFC 1928] is supported (with optional + [username/password authentication][RFC 1929]), in two flavors: + `socks5://` to resolve *hostname* locally, and `socks5h://` to let + the proxy resolve *hostname*. + +*command* + +: Command to use for `type=tunnel`. Must speak the [IMAP4rev1 + protocol][RFC 3501] on its standard output, and understand it on its + standard input. + +*STARTTLS* + +: Whether to use the [`STARTTLS`][RFC 2595] directive to upgrade to a + secure connection. Setting this to `YES` for a server not + advertising the `STARTTLS` capability causes `interimap` to + immediately abort the connection. + (Ignored for *type*s other than `imap`. Default: `YES`.) + +*auth* + +: Space-separated list of preferred authentication mechanisms. + `interimap` uses the first mechanism in that list that is also + advertised (prefixed with `AUTH=`) in the server's capability list. + Supported authentication mechanisms are `PLAIN` and `LOGIN`. + (Default: `PLAIN LOGIN`.) + +*username*, *password* + +: Username and password to authenticate with. Can be required for non + pre-authenticated connections, depending on the chosen + authentication mechanism. + +*compress* + +: Whether to use the [`IMAP COMPRESS` extension][RFC 4978] for servers + advertising it. + (Default: `NO` for the `[local]` section, `YES` for the `[remote]` + section.) + +*null-stderr* + +: Whether to redirect *command*'s standard error to `/dev/null` for + type `type=tunnel`. (Default: `NO`.) + +*SSL_protocols* + +: A space-separated list of SSL protocols to enable or disable (if + prefixed with an exclamation mark `!`. Known protocols are `SSLv2`, + `SSLv3`, `TLSv1`, `TLSv1.1`, and `TLSv1.2`. Enabling a protocol is + a short-hand for disabling all other protocols. + (Default: `!SSLv2 !SSLv3`, i.e., only enable TLSv1 and above.) + +*SSL_cipher_list* + +: The cipher list to send to the server. Although the server + determines which cipher suite is used, it should take the first + supported cipher in the list sent by the client. See + [`ciphers`(1ssl)] for more information. + +*SSL_fingerprint* + +: Fingerprint of the server certificate (or its public key) in the + form `[ALGO$]DIGEST_HEX`, where `ALGO` is the used algorithm + (by default `sha256`). + Attempting to connect to a server with a non-matching certificate + fingerprint causes `interimap` to abort the connection during the + SSL/TLS handshake. + +*SSL_verify* + +: Whether to verify the server certificate chain. + Note that using *SSL_fingerprint* to specify the fingerprint of the + server certificate is an orthogonal authentication measure as it + ignores the CA chain. + (Default: `YES`.) + +*SSL_CApath* + +: Directory to use for server certificate verification if + `SSL_verify=YES`. + This directory must be in “hash format”, see [`verify`(1ssl)] for + more information. + +*SSL_CAfile* + +: File containing trusted certificates to use during server + certificate authentication if `SSL_verify=YES`. + +Supported extensions +==================== + +Performance is better for servers supporting the following extensions to +the [IMAP4rev1 protocol][RFC 3501]: + + * LITERAL+ ([RFC 2088], recommended); + * MULTIAPPEND ([RFC 3502], recommended); + * COMPRESS=DEFLATE ([RFC 4978], recommended); + * SASL-IR ([RFC 4959]); and + * UNSELECT ([RFC 3691]). + +Known bugs and limitations +========================== + + * Using `interimap` on two identical servers with a non-existent or + empty *database* will duplicate each message due to the absence of + local ↔ remote UID association. + + * `interimap` is single threaded and doesn't use IMAP command + pipelining. Synchronization could be boosted up by sending + independent commands (such as the initial `LIST` and `STATUS` + commands) to both servers in parallel, and for a given server, by + sending independent commands (such as flag updates) in a pipeline. + + * Because the [IMAP protocol][RFC 3501] doesn't have a specific + response code for when a message is moved to another mailbox (either + using the `MOVE` command from [RFC 6851], or via `COPY` + `STORE` + + `EXPUNGE`), moving a message causes `interimap` to believe that it + was deleted while another one (which is replicated again) was added + to the other mailbox in the meantime. + + * `PLAIN` and `LOGIN` are the only authentication mechanisms currently + supported. + + * `interimap` will probably not work with non [RFC][RFC 3501]-compliant + servers. In particular, no work-around is currently implemented + beside the tunables in the [configuration file]. Moreover, few IMAP + servers have been tested so far. + +Standards +========= + + * M. Leech, M. Ganis, Y. Lee, R. Kuris, D. Koblas and L. Jones, + _SOCKS Protocol Version 5_, + [RFC 1928], March 1996. + * M. Leech, _Username/Password Authentication for SOCKS V5_, + [RFC 1929], March 1996. + * J. Myers, _IMAP4 non-synchronizing literals_, + [RFC 2088], January 1997. + * D. Goldsmith and M. Davis, + _A Mail-Safe Transformation Format of Unicode_, + [RFC 2152], May 1997. + * C. Newman, _Using TLS with IMAP, POP3 and ACAP_, + [RFC 2595], June 1999. + * M. Crispin, _Internet Message Access Protocol - Version 4rev1_, + [RFC 3501], March 2003. + * M. Crispin, + _Internet Message Access Protocol (IMAP) - MULTIAPPEND Extension_, + [RFC 3502], March 2003. + * A. Melnikov, + _Internet Message Access Protocol (IMAP) UNSELECT command_, + [RFC 3691], February 2004. + * M. Crispin, + _Internet Message Access Protocol (IMAP) - UIDPLUS extension_, + [RFC 4315], December 2005. + * A. Melnikov, + _Synchronization Operations for Disconnected IMAP4 Clients_, + [RFC 4549], June 2006. + * A. Gulbrandsen, _The IMAP COMPRESS Extension_, + [RFC 4978], August 2007. + * R. Siemborski and A. Gulbrandsen, _IMAP Extension for Simple + Authentication and Security Layer (SASL) Initial Client Response_, + [RFC 4959], September 2007. + * A. Gulbrandsen and A. Melnikov, + _The IMAP ENABLE Extension_, + [RFC 5161], March 2008. + * B. Leiba and A. Melnikov, + _Internet Message Access Protocol version 4 - LIST Command Extensions_, + [RFC 5258], June 2008. + * A. Melnikov and T. Sirainen, + _IMAP4 Extension for Returning STATUS Information in Extended LIST_, + [RFC 5819], March 2010. + * A. Gulbrandsen and N. Freed, + _Internet Message Access Protocol (IMAP) - MOVE Extension_, + [RFC 6851], January 2013. + * A. Melnikov and D. Cridland, + _IMAP Extensions: Quick Flag Changes Resynchronization (CONDSTORE) + and Quick Mailbox Resynchronization (QRESYNC)_, + [RFC 7162], May 2014. + +[RFC 7162]: https://tools.ietf.org/html/rfc7162 +[RFC 5258]: https://tools.ietf.org/html/rfc5258 +[RFC 5819]: https://tools.ietf.org/html/rfc5819 +[RFC 4315]: https://tools.ietf.org/html/rfc4315 +[RFC 4549]: https://tools.ietf.org/html/rfc4549 +[RFC 2152]: https://tools.ietf.org/html/rfc2152 +[RFC 3501]: https://tools.ietf.org/html/rfc3501 +[RFC 1928]: https://tools.ietf.org/html/rfc1928 +[RFC 1929]: https://tools.ietf.org/html/rfc1929 +[RFC 2595]: https://tools.ietf.org/html/rfc2595 +[RFC 4978]: https://tools.ietf.org/html/rfc4978 +[RFC 2088]: https://tools.ietf.org/html/rfc2088 +[RFC 3502]: https://tools.ietf.org/html/rfc3502 +[RFC 4959]: https://tools.ietf.org/html/rfc4959 +[RFC 3691]: https://tools.ietf.org/html/rfc3691 +[RFC 6851]: https://tools.ietf.org/html/rfc6851 +[RFC 5161]: https://tools.ietf.org/html/rfc5161 + +[INI file]: https://en.wikipedia.org/wiki/INI_file +[PCRE]: https://en.wikipedia.org/wiki/Perl_Compatible_Regular_Expressions +[`ciphers`(1ssl)]: https://www.openssl.org/docs/manmaster/apps/ciphers.html +[`verify`(1ssl)]: https://www.openssl.org/docs/manmaster/apps/verify.html -- cgit v1.2.3