From 25f1dbdf54947bd6bbce653bc64f6c45b2473792 Mon Sep 17 00:00:00 2001 From: Guilhem Moulin Date: Fri, 5 Jul 2019 01:03:36 +0200 Subject: Refactor documentation. In particular, move manpages to the 'doc' directory, and generate HTML documentation with `make html`. --- pullimap.md | 375 ------------------------------------------------------------ 1 file changed, 375 deletions(-) delete mode 100644 pullimap.md (limited to 'pullimap.md') diff --git a/pullimap.md b/pullimap.md deleted file mode 100644 index 1b2e509..0000000 --- a/pullimap.md +++ /dev/null @@ -1,375 +0,0 @@ -% pullimap(1) -% [Guilhem Moulin](mailto:guilhem@fripost.org) -% March 2016 - -Name -==== - -PullIMAP - Pull mails from an IMAP mailbox and deliver them to an SMTP session - -Synopsis -======== - -`pullimap` [**\-\-config=***FILE*] [**\-\-idle**[**=***SECONDS*]] -[**\-\-no-delivery**] [**\-\-quiet**] *SECTION* - -Description -=========== - -`pullimap` retrieves messages from an IMAP mailbox and deliver them to -an SMTP or LMTP transmission channel. It can also remove old messages -after a configurable retention period. - -A *statefile* is used to keep track of the mailbox's `UIDVALIDITY` and -`UIDNEXT` values. While `pullimap` is running, the *statefile* is also -used to keep track of UIDs being delivered, which avoids duplicate -deliveries in case the process is interrupted. -See the **[control flow](#control-flow)** section below for details. - -Options -======= - -`--config=`*FILE* - -: Specify an alternate [configuration file](#configuration-file). - Relative paths start from *$XDG_CONFIG_HOME/pullimap*, or *~/.config/pullimap* - if the `XDG_CONFIG_HOME` environment variable is unset. - -`--idle`[`=`*seconds*] - -: Don't exit after a successful poll. Instead, keep the connection open - and issue `IDLE` commands (require an IMAP server supporting [RFC - 2177]) to watch for updates in the mailbox. This also enables - `SO_KEEPALIVE` on the socket. - Each `IDLE` command is terminated after at most *seconds* (29 - minutes by default) to avoid being logged out for inactivity. - -`--no-delivery` - -: Update the *statefile*, but skip SMTP/LMTP delivery. This is mostly - useful for initializing the *statefile* when migrating to `pullimap` - from another similar program such as [`fetchmail`(1)] or - [`getmail`(1)]. - -`-q`, `--quiet` - -: Try to be quiet. - -`--debug` - -: Turn on debug mode. Debug messages are written to the error output. - Note that this include all IMAP traffic (except literals). - Depending on the chosen authentication mechanism, this might include - authentication credentials. - -`-h`, `--help` - -: Output a brief help and exit. - -`--version` - -: Show the version number and exit. - -Configuration file -================== - -Unless told otherwise by the `--config=FILE` command-line option, -`pullimap` reads its configuration from *$XDG_CONFIG_HOME/pullimap/config* -(or *~/.config/pullimap/config* if the `XDG_CONFIG_HOME` environment variable -is unset) as an [INI file]. -The syntax of the configuration file is a series of `OPTION=VALUE` -lines organized under some `[SECTION]`; lines starting with a ‘#’ or -‘;’ character are ignored as comments. -Valid options are: - -*statefile* - -: State file to use to keep track of the *mailbox*'s `UIDVALIDITY` and - `UIDNEXT` values. Relative paths start from - *$XDG_DATA_HOME/pullimap*, or *~/.local/share/pullimap* if the - `XDG_DATA_HOME` environment variable is unset. - (Default: the parent section name of the option.) - -*mailbox* - -: The IMAP mailbox ([UTF-7 encoded][RFC 2152] and unquoted) to pull - messages from. Support for persistent message Unique Identifiers - (UID) is required. (Default: `INBOX`.) - -*deliver-method* - -: `PROTOCOL:[ADDRESS]:PORT` where to deliver messages. Both - [SMTP][RFC 5321] and [LMTP][RFC 2033] servers are supported, and - [SMTP pipelining][RFC 2920] is used when possible. - (Default: `smtp:[127.0.0.1]:25`.) - -*deliver-ehlo* - -: Hostname to use in `EHLO` or `LHLO` commands. - (Default: `localhost.localdomain`.) - -*deliver-rcpt* - -: Message recipient. Note that the local part needs to quoted if it - contains special characters; see [RFC 5321] for details. - (Default: the username associated with the effective uid of the - `pullimap` process.) - -*purge-after* - -: Retention period (in days), after which messages are removed from - the IMAP server. (The value is at best 24h accurate due to the IMAP - `SEARCH` criterion ignoring time and timezone.) - If *purge-after* is set to `0` then messages are deleted immediately - after delivery. Otherwise `pullimap` issues an IMAP `SEARCH` (or - extended `SEARCH` on servers advertizing the [`ESEARCH`][RFC 4731] - capability) command to list old messages; if `--idle` is set then - the `SEARCH` command is issued again every 12 hours. - -*type* - -: One of `imap`, `imaps` or `tunnel`. - `type=imap` and `type=imaps` are respectively used for IMAP and IMAP - over SSL/TLS connections over an INET socket. - `type=tunnel` causes `pullimap` to create an unnamed pair of - connected sockets for interprocess communication with a *command* - instead of opening a network socket. - (Default: `imaps`.) - -*host* - -: Server hostname, for `type=imap` and `type=imaps`. - (Default: `localhost`.) - -*port* - -: Server port. - (Default: `143` for `type=imap`, `993` for `type=imaps`.) - -*proxy* - -: An optional SOCKS proxy to use for TCP connections to the IMAP - server (`type=imap` and `type=imaps` only), formatted as - `PROTOCOL://[USER:PASSWORD@]PROXYHOST[:PROXYPORT]`. - If `PROXYPORT` is omitted, it is assumed at port 1080. - Only [SOCKSv5][RFC 1928] is supported (with optional - [username/password authentication][RFC 1929]), in two flavors: - `socks5://` to resolve *hostname* locally, and `socks5h://` to let - the proxy resolve *hostname*. - -*command* - -: Command to use for `type=tunnel`. Must speak the [IMAP4rev1 - protocol][RFC 3501] on its standard output, and understand it on its - standard input. The value is passed to `` `/bin/sh -c` `` if it - contains shell metacharacters; otherwise it is split into words and - the resulting list is passed to `execvp`(3). - -*STARTTLS* - -: Whether to use the [`STARTTLS`][RFC 2595] directive to upgrade to a - secure connection. Setting this to `YES` for a server not - advertising the `STARTTLS` capability causes `pullimap` to - immediately abort the connection. - (Ignored for *type*s other than `imap`. Default: `YES`.) - -*auth* - -: Space-separated list of preferred authentication mechanisms. - `pullimap` uses the first mechanism in that list that is also - advertised (prefixed with `AUTH=`) in the server's capability list. - Supported authentication mechanisms are `PLAIN` and `LOGIN`. - (Default: `PLAIN LOGIN`.) - -*username*, *password* - -: Username and password to authenticate with. Can be required for non - pre-authenticated connections, depending on the chosen - authentication mechanism. - -*compress* - -: Whether to use the [`IMAP COMPRESS` extension][RFC 4978] for servers - advertising it. (Default: `YES`.) - -*null-stderr* - -: Whether to redirect *command*'s standard error to `/dev/null` for - `type=tunnel`. (Default: `NO`.) - -*SSL_protocols* - -: A space-separated list of SSL protocols to enable or disable (if - prefixed with an exclamation mark `!`. Known protocols are `SSLv2`, - `SSLv3`, `TLSv1`, `TLSv1.1`, `TLSv1.2`, and `TLSv1.3`. Enabling a - protocol is a short-hand for disabling all other protocols. - (Default: `!SSLv2 !SSLv3 !TLSv1 !TLSv1.1`, i.e., only enable TLSv1.2 - and above.) - -*SSL_cipher_list* - -: The cipher list to send to the server. Although the server - determines which cipher suite is used, it should take the first - supported cipher in the list sent by the client. See - [`ciphers`(1ssl)] for more information. - -*SSL_fingerprint* - -: Fingerprint of the server certificate's Subject Public Key Info, in - the form `[ALGO$]DIGEST_HEX` where `ALGO` is the used algorithm (by - default `sha256`). - Attempting to connect to a server with a non-matching certificate - SPKI fingerprint causes `pullimap` to abort the connection during - the SSL/TLS handshake. - The following command can be used to compute the SHA-256 digest of a - certificate's Subject Public Key Info: - - openssl x509 -in /path/to/server/certificate.pem -pubkey \ - | openssl pkey -pubin -outform DER \ - | openssl dgst -sha256 - -*SSL_verify* - -: Whether to verify the server certificate chain. - Note that using *SSL_fingerprint* to specify the fingerprint of the - server certificate is an orthogonal authentication measure as it - ignores the CA chain. - (Default: `YES`.) - -*SSL_CApath* - -: Directory to use for server certificate verification if - `SSL_verify=YES`. - This directory must be in “hash format”, see [`verify`(1ssl)] for - more information. - -*SSL_CAfile* - -: File containing trusted certificates to use during server - certificate authentication if `SSL_verify=YES`. - -Control flow -============ - -`pullimap` opens the *statefile* corresponding to a given configuration -*SECTION* with `O_DSYNC` to ensure that written data is flushed to the -underlying hardware by the time [`write`(2)] returns. Moreover an -exclusive lock is placed on the file descriptor immediately after -opening to prevent multiple `pullimap` processes from accessing the -*statefile* concurrently. - -Each *statefile* consists of a series of 32-bits big-endian integers. -Usually there are only two integers: the first is the *mailbox*'s -`UIDVALIDITY` value, and the second is the *mailbox*'s last seen -`UIDNEXT` value (`pullimap` then assumes that all messages with UID -smaller than this `UIDNEXT` value have already been retrieved and -delivered). -The [IMAP4rev1 specification][RFC 3501] does not guaranty that untagged -`FETCH` responses are sent ordered by UID in response to a `UID FETCH` -command. Thus it would be unsafe for `pullimap` to update the `UIDNEXT` -value in its *statefile* while the `UID FETCH` command is progress. -Instead, for each untagged `FETCH` response received while the `UID -FETCH` command is in progress, `pullimap` delivers the message `RFC822` -body to the SMTP or LMTP server (specified with *deliver-method*) then -appends the message UID to the *statefile*. -When the `UID FETCH` command eventually terminates, `pullimap` updates -the `UIDNEXT` value in the *statefile* and truncate the file down to 8 -bytes. Keeping track of message UIDs as they are received avoids -duplicate in the event of a crash or connection loss while the `UID -FETCH` command is in progress. - -In more details, `pullimap` works as follows: - - 1. Issue a `UID FETCH` command to retrieve message `ENVELOPE` and - `RFC822` (and `UID`) with UID bigger or equal than the `UIDNEXT` - value found in the *statefile*. - While the `UID FETCH` command is in progress, perform the following - for each untagged `FETCH` response sent by the server: - - i. if no SMTP/LMTP transmission channel was opened, open one to the - server specified with *deliver-method* and send an `EHLO` (or - `LHO`) command with the domain specified by *deliver-ehlo* (the - channel is kept open and shared for all messages retrieved while - the `UID FETCH` IMAP command is in progress); - - i. perform a mail transaction (using [SMTP pipelining][RFC 2920] if - possible) to deliver the retrieved message `RFC822` body to the - SMTP or LMTP session; and - - i. append the message UID to the *statefile*. - - 2. If an SMTP/LMTP transmission channel was opened, send a `QUIT` command - to terminate it gracefully. - - 3. Issue a `UID STORE` command to mark all retrieved messages (and - stalled UIDs found in the *statefile* after the eigth byte) as - `\Seen`. - - 4. Update the *statefile* with the new UIDNEXT value (bytes 5-8). - - 5. Truncate the *statefile* down to 8 bytes (so that it contains only - two 32-bits integers, respectively the *mailbox*'s current - `UIDVALIDITY` and `UIDNEXT` values). - - 6. If `--idle` was set, issue an `IDLE` command; stop idling and go - back to step 1 when a new message is received (or when the `IDLE` - timeout expires). - -Standards -========= - - * M. Leech, M. Ganis, Y. Lee, R. Kuris, D. Koblas and L. Jones, - _SOCKS Protocol Version 5_, - [RFC 1928], March 1996. - * M. Leech, _Username/Password Authentication for SOCKS V5_, - [RFC 1929], March 1996. - * J. Myers, _Local Mail Transfer Protocol_, - [RFC 2033], October 1996. - * J. Myers, _IMAP4 non-synchronizing literals_, - [RFC 2088], January 1997. - * D. Goldsmith and M. Davis, - _A Mail-Safe Transformation Format of Unicode_, - [RFC 2152], May 1997. - * B. Leiba, _IMAP4 `IDLE` command_, - [RFC 2177], June 1997. - * C. Newman, _Using TLS with IMAP, POP3 and ACAP_, - [RFC 2595], June 1999. - * N. Freed, _SMTP Service Extension for Command Pipelining_, - [RFC 2920], September 2000. - * M. Crispin, _Internet Message Access Protocol - Version 4rev1_, - [RFC 3501], March 2003. - * M. Crispin, - _Internet Message Access Protocol (IMAP) - `UIDPLUS` extension_, - [RFC 4315], December 2005. - * A. Gulbrandsen, _The IMAP `COMPRESS` Extension_, - [RFC 4978], August 2007. - * A. Melnikov and D. Cridland, _IMAP4 Extension to SEARCH Command for - Controlling What Kind of Information Is Returned_, - [RFC 4731], November 2006. - * R. Siemborski and A. Gulbrandsen, _IMAP Extension for Simple - Authentication and Security Layer (SASL) Initial Client Response_, - [RFC 4959], September 2007. - * J. Klensin, _Simple Mail Transfer Protocol_, - [RFC 5321], October 2008. - -[RFC 4315]: https://tools.ietf.org/html/rfc4315 -[RFC 2177]: https://tools.ietf.org/html/rfc2177 -[RFC 2595]: https://tools.ietf.org/html/rfc2595 -[RFC 4959]: https://tools.ietf.org/html/rfc4959 -[RFC 2152]: https://tools.ietf.org/html/rfc2152 -[RFC 2088]: https://tools.ietf.org/html/rfc2088 -[RFC 5321]: https://tools.ietf.org/html/rfc5321 -[RFC 2033]: https://tools.ietf.org/html/rfc2033 -[RFC 2920]: https://tools.ietf.org/html/rfc2920 -[RFC 3501]: https://tools.ietf.org/html/rfc3501 -[RFC 4978]: https://tools.ietf.org/html/rfc4978 -[RFC 1928]: https://tools.ietf.org/html/rfc1928 -[RFC 1929]: https://tools.ietf.org/html/rfc1929 -[RFC 4731]: https://tools.ietf.org/html/rfc4731 - -[INI file]: https://en.wikipedia.org/wiki/INI_file -[`fetchmail`(1)]: http://www.fetchmail.info/ -[`getmail`(1)]: http://pyropus.ca/software/getmail/ -[`write`(2)]: http://man7.org/linux/man-pages/man2/write.2.html -[`ciphers`(1ssl)]: https://www.openssl.org/docs/manmaster/apps/ciphers.html -[`verify`(1ssl)]: https://www.openssl.org/docs/manmaster/apps/verify.html -- cgit v1.2.3