path: root/lacme.8.md

% lacme(8)
% [Guilhem Moulin](mailto:guilhem@fripost.org)
% December 2015

Name
====

lacme - [ACME] client written with process isolation and minimal
privileges in mind

Synopsis
========

`lacme` [`--config=FILENAME`] [`--socket=PATH`] [*OPTION* …] *COMMAND* [*ARGUMENT* …]

Description
===========

`lacme` is a small [ACME] client written with process isolation and
minimal privileges in mind.  It is divided into four components, each
with its own executable:

 1. A [`lacme-accountd`(1)] process to manage the account key and issue
    SHA-256 signatures needed for each [ACME] command.  (This process
    binds to a UNIX-domain socket to reply to signature requests from
    the [ACME] client.)
    One can use the UNIX-domain socket forwarding facility of OpenSSH
    6.7 and later to run [`lacme-accountd`(1)] and `lacme` on different
    hosts.  Alternatively, the [`lacme-accountd`(1)] process can be
    spawned by the “master” `lacme` process below; in that case, the
    two processes communicate through a socket pair.

 2. A “master” `lacme` process, which runs as root and is the only
    component with access to the private key material of the server
    keys.  It is used to fork the [ACME] client (and optionally the
    [ACME] webserver) after dropping root privileges.
    For certificate issuances (`newOrder` command), it also generates
    Certificate Signing Requests, then verifies the validity of the
    issued certificate, and optionally reloads or restarts services when
    the *notify* option is set.

 3. An actual [ACME] client (specified with the *command* option of the
    [`[client]` section](#client-section) of the configuration file),
    which builds [ACME] commands and dialogues with the remote [ACME]
    server.
    Since [ACME] commands need to be signed with the account key, the
    “master” `lacme` process passes the [`lacme-accountd`(1)]
    UNIX-domain socket to the [ACME] client: data signatures are
    requested by writing the data to be signed to the socket.

 4. For certificate issuances (`newOrder` command), an optional
    webserver (specified with the *command* option of the [`[webserver]`
    section](#webserver-section) of the configuration file), which is
    spawned by the “master” `lacme`.  (The only challenge type currently
    supported by `lacme` is `http-01`, which requires a webserver to
    answer challenges.)  That webserver only processes `GET` and `HEAD`
    requests under the `/.well-known/acme-challenge/` URI.
    Moreover temporary [`iptables`(8)] rules can be automatically
    installed to open the HTTP port.

Commands
========

`lacme account` [`--tos-agreed`] [`--register`] [*CONTACT* …]

:   Register (if `--registered` is set) a [`lacme-accountd`(1)]-managed
    account key.  A list of *CONTACT* information (such as `maito:`
    URIs) can be specified in order for the [ACME] server to contact the
    client for issues related to this registration (such as
    notifications about server-initiated revocations).  `--tos-agreed`
    indicates agreement with the [ACME] server's Terms of Service (and
    might be required for registration).

    If the account key is already registered, update the contact info
    with the given list of *CONTACT* information.

    Upon success, `lacme` prints the new or updated Account Object from
    the [ACME] server.

`lacme newOrder` [`--config-certs=`*FILE*] [`--min-days=`*INT*|`--force`] [*SECTION* …]

:   Read the certificate configuration *FILE* (see the **[certificate
    configuration file](#certificate-configuration-file)** section below
    for the configuration options), and request new Certificate Issuance
    for each of its sections (or the given list of *SECTION*s).
    Command alias: `new-order`.

    The flag `--force` is an alias for `--min-days=-1`, which forces
    renewal regardless of the expiration date of existing certificates.

`lacme` `revokeCert` *FILE* [*FILE* …]

:   Request that the given certificate(s) *FILE*(s) be revoked.  For
    this command, [`lacme-accountd`(1)] can be pointed to either the
    account key or the server's private key.
    Command alias: `revoke-cert`.

Generic options
===============

`--config=`*filename*

:    Use *filename* as configuration file.  See the **[configuration
     file](#configuration-file)** section below for the configuration
     options.

`--socket=`*path*

:   Use *path* as the [`lacme-accountd`(1)] UNIX-domain socket to
    connect to for signature requests from the [ACME] client.  `lacme`
    aborts if `path` is readable or writable by other users, or if its
    parent directory is writable by other users.
    This command-line option overrides the *socket* option of the
    [`[client]` section](#client-section) of the configuration file; it
    also causes the [`[accountd]` section](#accountd-section) to be
    ignored.

`-h`, `--help`

:   Display a brief help and exit.

`-q`, `--quiet`

:   Be quiet.

`--debug`

:   Turn on debug mode.

Configuration file
==================

If `--config=` is not given, `lacme` uses the first existing
configuration file among *./lacme.conf*,
*$XDG_CONFIG_HOME/lacme/lacme.conf* (or *~/.config/lacme/lacme.conf* if
the `XDG_CONFIG_HOME` environment variable is not set), and
*@@sysconfdir@@/lacme/lacme.conf*.
Valid options are:

Default section
---------------

*config-certs*

:   For certificate issuances (`newOrder` command), specify the
    space-separated list of certificate configuration files or
    directories to use (see the **[certificate configuration
    file](#certificate-configuration-file)** section below for the
    configuration options).

    Paths not starting with `/` are relative to the directory name of
    the **[configuration filename](#configuration-file)**.  The list of
    files and directories is processed in order, with the later items
    taking precedence.  Files in a directory are processed in
    lexicographic order, only considering the ones with suffix `.conf`.

    Default: `lacme-certs.conf lacme-certs.conf.d/`.

`[client]` section
------------------

This section is used for configuring the [ACME] client (which takes care
of [ACME] commands and dialogues with the remote [ACME] server).

*socket*

:   See `--socket=`.
    Default: *$XDG_RUNTIME_DIR/S.lacme* if the `XDG_RUNTIME_DIR`
    environment variable is set.

*user*

:   The username to drop privileges to (setting both effective and real
    uid).  Skip privilege drop if the value is empty (not recommended).
    Default: `@@lacme_client_user@@`.

*group*

:   The groupname to drop privileges to (setting both effective and real
    gid, and also setting the list of supplementary gids to that single
    group).  Skip privilege drop if the value is empty (not
    recommended).
    Default: `@@lacme_client_group@@`.

*command*

:   Path to the [ACME] client executable.
    Default: `@@libexecdir@@/lacme/client`.

*server*

:   Root URI of the [ACME] server.
    Default: `https://acme-v02.api.letsencrypt.org/directory`.

*timeout*

:   Timeout in seconds after which the client stops polling the [ACME]
    server and considers the request failed.
    Default: `30`.

*SSL_verify*

:   Whether to verify the server certificate chain.
    Default: `Yes`.

*SSL_version*

:   Specify the version of the SSL protocol used to transmit data.

*SSL_cipher_list*

:   Specify the cipher list for the connection, see [`ciphers`(1ssl)]
    for more information.

`[webserver]` section
---------------------

This section is used to configure how [ACME] challenge responses are
served during certificate issuance.

*listen*

:   Comma- or space-separated list of addresses to listen on.  Valid
    addresses are of the form `IPV4:PORT`, `[IPV6]:PORT` (where the
    `:PORT` suffix is optional and defaults to the HTTP port 80), or an
    absolute path of a UNIX-domain socket (created with mode `0666`).
    Default: `@@runstatedir@@/lacme-www.socket`.

    **Note**: The default value is only suitable when an external HTTP
    daemon is publicly reachable and passes all ACME challenge requests
    to the webserver component through the UNIX-domain socket
    `@@runstatedir@@/lacme-www.socket` (for instance using the provided
    `@@sysconfdir@@/lacme/apache2.conf` or `@@sysconfdir@@/lacme/nginx.conf` configuration
    snippets for each virtual host requiring authorization).  If there
    is no HTTP daemon bound to port 80 one needs to set *listen* to
    `[::]` (or `0.0.0.0 [::]` when dual IPv4/IPv6 stack is disabled or
    unavailable), and possibly also set *iptables* to `Yes`.

*challenge-directory*

:   Specify a non-existent directory under which an external HTTP daemon
    is configured to serve `GET` requests for challenge files under
    `/.well-known/acme-challenge/` (for each virtual host requiring
    authorization) as static files.
    This option is required when *listen* is empty.

*user*

:   The username to drop privileges to (setting both effective and real
    uid).  Skip privilege drop if the value is empty (not recommended).
    Default: `@@lacme_www_user@@`.

*group*

:   The groupname to drop privileges to (setting both effective and real
    gid, and also setting the list of supplementary gids to that single
    group).  Skip privilege drop if the value is empty (not
    recommended).
    Default: `@@lacme_www_group@@`.

*command*

:   Path to the [ACME] webserver executable.  A separate process is
    spawned for each address to *listen* on.  (In particular no
    webserver process is forked when the *listen* option is empty.)
    Default: `@@libexecdir@@/lacme/webserver`.

*iptables*

:   Whether to automatically install temporary [`iptables`(8)] rules to
    open the `ADDRESS[:PORT]` specified with *listen*.  The rules are
    automatically removed once `lacme` exits.
    Default: `No`.

`[accountd]` section
---------------------

This section is used for configuring the [`lacme-accountd`(1)] child
process.  If the section (including its header) is absent or commented
out, or if the CLI option `--socket` is specified, then `lacme` connects
to an existing [`lacme-accountd`(1)] process via the specified
UNIX-domain socket.

*user*

:   The username to drop privileges to (setting both effective and real
    uid).  Skip privilege drop if the value is empty.

*group*

:   The groupname to drop privileges to (setting both effective and real
    gid, and also setting the list of supplementary gids to that single
    group).  Skip privilege drop if the value is empty.

*command*

:   Path to the [`lacme-accountd`(1)] executable.
    Default: `@@bindir@@/lacme-accountd`.

*config*

:   Path to the [`lacme-accountd`(1)] configuration file.
    Default: `@@sysconfdir@@/lacme/lacme-accountd.conf`.

*privkey*

:   The (private) account key to use for signing requests.  See
    [`lacme-accountd`(1)] for details.

*quiet*

:   Be quiet. Possible values: `Yes`/`No`.

Certificate configuration file
==============================

For certificate issuances (`newOrder` command), a separate file is used
to configure paths to the certificate and key, as well as the subject,
subjectAltName, etc. to generate Certificate Signing Requests.
Each section denotes a separate certificate issuance.
Valid options are:

*certificate*

:   Where to store the issued certificate (in PEM format).
    At least one of *certificate* or *certificate-chain* is required.

*certificate-chain*

:   Where to store the issued certificate along with its chain of trust
    (in PEM format).
    At least one of *certificate* or *certificate-chain* is required.

*certificate-key*

:   Path to the service's private key.  This option is required.  The
    [`genpkey`(1ssl)] command can be used to generate a new service RSA
    key:

        $ install -vm0600 /dev/null /path/to/service.rsa.key
        $ openssl genpkey -algorithm RSA -out /path/to/service.rsa.key

    Alternatively, for an ECDSA key using the NIST P-256 curve:

        $ install -vm0600 /dev/null /path/to/service.ecdsa.key
        $ openssl genpkey -algorithm EC -out /path/to/service.ecdsa.key \
			-pkeyopt ec_paramgen_curve:P-256 \
			-pkeyopt ec_param_enc:named_curve

    `lacme` supports any key algorithm than the underlying libssl
    (OpenSSL) version is able to manipulate, but the [ACME] server might
    reject CSRs associated with private keys of deprecated and/or
    “exotic” algorithms.

    For a dual cert setup (for instance RSA+ECDSA), duplicate the
    certificate section and use a distinct *certificate-key* resp.
    *certificate* (or *certificate-chain*) value for each key algorithm.

*min-days*

:   For an existing certificate, the minimum number of days before its
    expiration date the section is considered for re-issuance.
    A negative value forces reissuance, while the number `0` limits
    reissuance to expired certificates.
    Default: the value of the CLI option `--min-days`, or `21` if there
    is no such option.

*CAfile*

:   Path to the bundle of trusted issuer certificates.  This is used for
    validating each certificate after issuance or renewal.  Specifying
    an empty value skips certificate validation.
    Default: `@@datadir@@/lacme/ca-certificates.crt`.

*hash*

:   Message digest to sign the Certificate Signing Request with,
    overriding the [`req`(1ssl)] default.

*keyUsage*

:   Comma-separated list of Key Usages, for instance `digitalSignature,
    keyEncipherment`, to include in the Certificate Signing Request.
    See [`x509v3_config`(5ssl)] for a list of possible values.

*subject*

:   Subject field of the Certificate Signing Request, in the form
    `/type0=value0/type1=value1/type2=…`.  This option is required.

*subjectAltName*

:   Comma-separated list of Subject Alternative Names, in the form
    `type0:value1,type1:value1,type2:…`
    The only `type` currently supported is `DNS`, to specify an
    alternative domain name.

*chown*

:   An optional `username[:groupname]` to chown the issued *certificate*
    and *certificate-chain* to.

*chmod*

:   An optional octal mode to chmod the issued *certificate* and
    *certificate-chain* to.

*notify*

:   Command to pass the the system's command shell (`/bin/sh -c`)
    after successful installation of the *certificate* and/or
    *certificate-chain*.

Examples
========

    $ sudo lacme account --register --tos-agreed mailto:noreply@example.com
    $ sudo lacme newOrder
    $ sudo lacme revokeCert /path/to/service.crt

See also
========

[`lacme-accountd`(1)]

[ACME]: https://tools.ietf.org/html/rfc8555
[`lacme-accountd`(1)]: lacme-accountd.1.html
[`iptables`(8)]: https://linux.die.net/man/8/iptables
[`ciphers`(1ssl)]: https://www.openssl.org/docs/manmaster/man1/openssl-ciphers.html
[`x509v3_config`(5ssl)]: https://www.openssl.org/docs/manmaster/man5/x509v3_config.html
[`genpkey`(1ssl)]: https://www.openssl.org/docs/manmaster/man1/openssl-genpkey.html
[`req`(1ssl)]: https://www.openssl.org/docs/manmaster/man1/openssl-req.html