blob: 4374e160b28b6cdd6c439f7b852fbbeca26f5d24 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
|
Introduction
============
A firmware Sketch for the Keyboardio Model 01. Based algerno's:
https://git.madhouse-project.org/algernon/Model01-Sketch#base-layer
Build
=====
On Debian systems, the following packages are required:
- avr-libc
- avrdude
- binutils-avr
- gcc-avr
- arduino-mk
Running `apt install arduino-mk` should pull in all required
dependencies. Moreover Arduino 1.6.7 or newer is required.
Unfortunately, as of 2019-06-25 the version found in Debian sid is too
old (cf. #780706, #925578, #927329), so for now we add ArduinoCore-avr
as a submodule.
Initialize (or update) submodules:
~$ git submodule update --init \
lib/hardware/arduino/avr \
lib/hardware/keyboardio
~$ git -C lib/hardware/keyboardio submodule update --init --recursive \
"avr/bootloaders/*" \
"avr/libraries/Kaleidoscope" \
"avr/libraries/Kaleidoscope-HIDAdaptor-KeyboardioHID" \
"avr/libraries/Keyboardio*"
~$ make
To enable communicating with the host via a simple Serial protocol, use
~$ ENABLE_SERIAL=1 make
Flash firmware
==============
~$ make upload
Press down the 'prog' key while the board is rebooting. You can release
it once it glows red.
Apply the color map
===================
~$ make apply-colormap
This requires a firmware supporting the Serial protocol. (Add
ENABLE_SERIAL=1 to the build environment.)
|
