Rename ‘imapsync’ to ‘interimap’.

To avoid confusion with http://imapsync.lamiral.info .

8 files changed, 50 insertions, 49 deletions

diff --git a/Changelog b/Changelog
index 4c3a493..acd02d2 100644
--- a/Changelog
+++ b/Changelog
@@ -1,5 +1,5 @@
-imapsync (0.1) upstream;
+interimap (0.1) upstream;
 
-  * Initial release.
+  * Initial public release.  Development was started in July 2015.
 
- -- Guilhem Moulin <guilhem@guilhem.org>  Thu, 23 Jul 2015 04:15:47 +0200
+ -- Guilhem Moulin <guilhem@guilhem.org>  Mon, 07 Sep 2015 17:14:42 +0200
diff --git a/INSTALL b/INSTALL
index 7cfbdc3..e11e08a 100644
--- a/INSTALL
+++ b/INSTALL
@@ -1,4 +1,4 @@
-imapsync depends on the following Perl modules:
+InterIMAP depends on the following Perl modules:
 
   - Config::Tiny
   - DBI
diff --git a/README b/README
index 1195720..44190f3 100644
--- a/README
+++ b/README
@@ -1,5 +1,5 @@
-imapsync is a fast bidirectional synchronization program for
-QRESYNC-capable IMAP servers.  Consult the manual for more information.
+InterIMAP is a fast two-way synchronization program for QRESYNC-capable
+IMAP4rev1 servers.  Consult the manual for more information.
 
 
 #######################################################################
@@ -17,14 +17,14 @@ propagate changes (flag updates and message deletions) to existing
 messages, then 2/ copy the new messages.  The naive way to perform the
 first step is to issue a FETCH command to list all messages in the
 mailbox along with their flags and UIDs, causing heavy network usage.
-Instead, imapsync takes advantage of the QRESYNC extension from
+Instead, InterIMAP takes advantage of the QRESYNC extension from
 [RFC7162] to perform stateful synchronization: querying changes since
 the last synchronization only gives a phenomenal performance boost and
 drastically reduces the network traffic.
 
 For convenience reasons servers must also support LIST-EXTENDED
 [RFC5258], LIST-STATUS [RFC5819] and UIDPLUS [RFC4315].  Furthermore,
-while imapsync can work with servers lacking support for LITERAL+
+while InterIMAP can work with servers lacking support for LITERAL+
 [RFC2088] and MULTIAPPEND [RFC3502], these extensions greatly improve
 performance by reducing the number of required round trips hence are
 recommended.
@@ -50,14 +50,14 @@ the AUTHENTICATE command.  For instance the following configuration
 snippet saves bandwidth and brings a significant speed gain compared to
 type=imaps.
 
-    local: $XDG_CONFIG_HOME/imapsync:
+    local: $XDG_CONFIG_HOME/interimap:
       [remote]
       type = tunnel
       command = /usr/bin/ssh user@imap.example.net
 
     local: ~/.ssh/config:
       Host imap.example.net
-          IdentityFile ~/.ssh/id-imapsync
+          IdentityFile ~/.ssh/id-interimap
           IdentitiesOnly yes
           ControlPath /run/shm/%u@%n
           ControlMaster auto
@@ -69,12 +69,12 @@ type=imaps.
           Compression yes
 
     remote: ~user/.ssh/authorized_keys:
-      command="/usr/lib/dovecot/imap",no-agent-forwarding,no-port-forwarding,no-pty,no-user-rc,no-X11-forwarding ssh-... id-imapsync
+      command="/usr/lib/dovecot/imap",no-agent-forwarding,no-port-forwarding,no-pty,no-user-rc,no-X11-forwarding ssh-... id-interimap
 
 
 #######################################################################
 
 
-imapsync is Copyright© 2015 Guilhem Moulin ⟨guilhem@fripost.org⟩, and
+InterIMAP is Copyright© 2015 Guilhem Moulin ⟨guilhem@fripost.org⟩, and
 licensed for use under the GNU General Public License version 3 or
 later.  See ‘COPYING’ for specific terms and distribution information.
diff --git a/imapsync b/interimap
index a454c5d..6442054 100755
--- a/imapsync
+++ b/interimap
@@ -1,7 +1,7 @@
 #!/usr/bin/perl -T
 
 #----------------------------------------------------------------------
-# IMAP-to-IMAP synchronization program for QRESYNC-capable servers
+# Fast two-way synchronization program for QRESYNC-capable IMAP servers
 # Copyright © 2015 Guilhem Moulin <guilhem@fripost.org>
 #
 # This program is free software: you can redistribute it and/or modify
@@ -22,14 +22,14 @@ use strict;
 use warnings;
 
 our $VERSION = '0.1';
-my $NAME = 'imapsync';
+my $NAME = 'interimap';
 use Getopt::Long qw/:config posix_default no_ignore_case gnu_compat
                             bundling auto_version/;
 use DBI ();
 use List::Util 'first';
 
 use lib 'lib';
-use Net::IMAP::Sync qw/read_config compact_set $IMAP_text $IMAP_cond/;
+use Net::IMAP::InterIMAP qw/read_config compact_set $IMAP_text $IMAP_cond/;
 
 # Clean up PATH
 $ENV{PATH} = join ':', qw{/usr/local/bin /usr/bin /bin};
@@ -229,7 +229,7 @@ foreach my $name (qw/local remote/) {
     $config{name} = $name;
     $config{'logger-fd'} = $LOGGER_FD if defined $LOGGER_FD;
 
-    $IMAP->{$name} = { client => Net::IMAP::Sync::->new(%config) };
+    $IMAP->{$name} = { client => Net::IMAP::InterIMAP::->new(%config) };
     my $client = $IMAP->{$name}->{client};
 
     die "Non $_-capable IMAP server.\n" foreach $client->incapable(qw/LIST-EXTENDED LIST-STATUS UIDPLUS/);
@@ -254,8 +254,8 @@ foreach my $name (qw/local remote/) {
         $list .= (defined $CONF->{_}->{'list-mailbox'} ? '('.$CONF->{_}->{'list-mailbox'}.')' : '*') unless @ARGV;
         @params = ('SUBSCRIBED', 'STATUS (UIDVALIDITY UIDNEXT HIGHESTMODSEQ)');
     }
-    $list .= $#ARGV == 0 ? Net::IMAP::Sync::quote($ARGV[0])
-           : ('('.join(' ',map {Net::IMAP::Sync::quote($_)} @ARGV).')') if @ARGV;
+    $list .= $#ARGV == 0 ? Net::IMAP::InterIMAP::quote($ARGV[0])
+           : ('('.join(' ',map {Net::IMAP::InterIMAP::quote($_)} @ARGV).')') if @ARGV;
     @{$IMAP->{$name}}{qw/mailboxes delims/} = $client->list($list, @params);
 }
 
diff --git a/imapsync.1 b/interimap.1
index af753b3..00b87e3 100644
--- a/imapsync.1
+++ b/interimap.1
@@ -1,20 +1,21 @@
-.TH IMAPSYNC "1" "JULY 2015" "imapsync" "User Commands"
+.TH INTERIMAP "1" "JULY 2015" "InterIMAP" "User Commands"
 
 .SH NAME
-imapsync \- IMAP-to-IMAP synchronization program for QRESYNC-capable servers
+InterIMAP \- Fast two-way synchronization program for QRESYNC-capable
+IMAP servers
 
 .SH SYNOPSIS
-.B imapsync\fR [\fIOPTION\fR ...] [\fICOMMAND\fR] [\fIMAILBOX\fR ...]
+.B interimap\fR [\fIOPTION\fR ...] [\fICOMMAND\fR] [\fIMAILBOX\fR ...]
 
 
 .SH DESCRIPTION
 .PP
-.B imapsync\fR performs stateful synchronization between two IMAP4rev1
+.B InterIMAP\fR performs stateful synchronization between two IMAP4rev1
 servers.
 Such synchronization is made possible by the QRESYNC extension from
 [RFC7162]; for convenience reasons servers must also support
 LIST\-EXTENDED [RFC5258], LIST\-STATUS [RFC5819] and UIDPLUS [RFC4315].
-Furthermore, while \fBimapsync\fR can work with servers lacking support
+Furthermore, while \fBInterIMAP\fR can work with servers lacking support
 for LITERAL+ [RFC2088] and MULTIAPPEND [RFC3502], these extensions
 greatly improve performance by reducing the number of required round
 trips hence are recommended.
@@ -23,9 +24,9 @@ trips hence are recommended.
 Stateful synchronization is only possible for mailboxes supporting
 persistent message Unique Identifiers (UID) and persistent storage of
 mod\-sequences (MODSEQ); any non\-compliant mailbox will cause
-\fBimapsync\fR to abort.
+\fBInterIMAP\fR to abort.
 Furthermore, because UIDs are allocated not by the client but by the
-server, \fBimapsync\fR needs to keep track of associations between local
+server, \fBInterIMAP\fR needs to keep track of associations between local
 and remote UIDs for each mailbox.
 The synchronization state of a mailbox consists of its UIDNEXT and
 HIGHESTMODSEQ values on each server;
@@ -51,7 +52,7 @@ and b/ issue UID STORE commands to propagate flag updates (send a single
 command for each flag list in order the reduce the number of round
 trips).
 (Conflicts may occur if the metadata of a message has been updated on
-both servers with different flag lists; in that case \fBimapsync\fR
+both servers with different flag lists; in that case \fBInterIMAP\fR
 issues a warning and updates the message on each server with the union
 of both flag lists.)
 Repeat this step if the server sent some updates in the meantime.
@@ -71,13 +72,13 @@ Go back to step 1 to proceed with the next unsynchronized mailbox.
 
 .SH COMMANDS
 .PP
-By default \fBimapsync\fR synchronizes each mailbox listed by the
+By default \fBInterIMAP\fR synchronizes each mailbox listed by the
 \(lqLIST "" "*"\(rq IMAP command;
 the \fIlist-mailbox\fR, \fIlist-select-opts\fR and \fIignore-mailbox\fR
 options from the configuration file can be used to shrink that list and
 save bandwidth.
 However if some extra argument are provided on the command line,
-\fBimapsync\fR ignores said options and synchronizes the given
+\fBInterIMAP\fR ignores said options and synchronizes the given
 \fIMAILBOX\fRes instead.  Note that each \fIMAILBOX\fR is taken \(lqas
 is\(rq; in particular, it must be UTF-7 encoded, unquoted, and the list
 wildcards \(oq*\(cq and \(oq%\(cq are not interpolated.
@@ -85,16 +86,16 @@ wildcards \(oq*\(cq and \(oq%\(cq are not interpolated.
 .PP
 If the synchronization was interrupted during a previous run while some
 messages were being replicated (but before the UIDNEXT or HIGHESTMODSEQ
-values have been updated), \fBimapsync\fR performs a \(lqfull
+values have been updated), \fBInterIMAP\fR performs a \(lqfull
 synchronization\(rq on theses messages only:
 downloading the whole UID and flag lists on each servers allows
-\fBimapsync\fR to detect messages that have been removed or for which
+\fBInterIMAP\fR to detect messages that have been removed or for which
 their flags have changed in the meantime.
 Finally, after propagating the offline changes for these messages,
-\fBimapsync\fR resumes the synchronization for the rest of the mailbox.
+\fBInterIMAP\fR resumes the synchronization for the rest of the mailbox.
 
 .PP
-Specifying one of the commands below makes \fBimapsync\fR perform an
+Specifying one of the commands below makes \fBInterIMAP\fR perform an
 action other than the default QRESYNC-based synchronization.
 
 .TP
@@ -125,7 +126,7 @@ children are not deleted.
 Rename the mailbox \fISOURCE\fR to \fIDEST\fR on each target (by default
 each server plus the database, unless \fB\-\-target\fR specifies
 otherwise) where it exists.
-\fBimapsync\fR aborts if \fIDEST\fR already exists on either target.
+\fBInterIMAP\fR aborts if \fIDEST\fR already exists on either target.
 Note that per [RFC3501] the renaming is recursive: \fISOURCE\fR's
 children are moved to become \fIDEST\fR's children instead.
 
@@ -164,8 +165,8 @@ Show the version number and exit.
 .SH CONFIGURATION FILE
 
 Unless told otherwise by the \fB\-\-config=\fR\fIFILE\fR option,
-\fBimapsync\fR reads its configuration from
-\fI$XDG_CONFIG_HOME/imapsync\fR (or \fI~/.config/imapsync\fR if the
+\fBInterIMAP\fR reads its configuration from
+\fI$XDG_CONFIG_HOME/interimap\fR (or \fI~/.config/interimap\fR if the
 XDG_CONFIG_HOME environment variable is unset) as an INI file.
 The syntax of the configuration file is a serie of
 \fIOPTION\fR=\fIVALUE\fR lines organized under some \fI[SECTION]\fR;
@@ -180,8 +181,8 @@ Valid options are:
 SQLite version 3 database file to use to keep track of associations
 between local and remote UIDs, as well as the UIDVALIDITY, UIDNEXT and
 HIGHESTMODSEQ of each known mailbox on both servers.
-Relative paths start from \fI$XDG_DATA_HOME/imapsync\fR, or
-\fI~/.local/share/imapsync\fR if the XDG_DATA_HOME environment variable
+Relative paths start from \fI$XDG_DATA_HOME/interimap\fR, or
+\fI~/.local/share/interimap\fR if the XDG_DATA_HOME environment variable
 is unset.
 This option is only available in the default section.
 (Default: \(lq\fIhost\fR.db\)\(rq, where \fIhost\fR is taken from the
@@ -233,7 +234,7 @@ only available in the default section.
 One of \(lqimap\(rq, \(lqimaps\(rq or \(lqtunnel\(rq.
 \fItype\fR=imap and \fItype\fR=imaps are respectively used for IMAP and
 IMAP over SSL/TLS connections over a INET socket.
-\fItype\fR=tunnel causes \fBimapsync\fR to open a pipe to a
+\fItype\fR=tunnel causes \fBInterIMAP\fR to open a pipe to a
 \fIcommand\fR instead of a raw socket.
 Note that specifying \fItype\fR=tunnel in the \(lq[remote]\(rq section
 makes the default \fIdatabase\fR to be \(lqlocalhost.db\(rq.
@@ -259,14 +260,14 @@ on its standard output, and understand it on its standard input.
 .I STARTTLS
 Whether to use the \(lqSTARTTLS\(rq directive to upgrade to a secure
 connection.  Setting this to \(lqYES\(rq for a server not advertising
-the \(lqSTARTTLS\(rq capability causes \fBimapsync\fR to immediately
+the \(lqSTARTTLS\(rq capability causes \fBInterIMAP\fR to immediately
 abort the connection.
 (Ignored for \fItype\fRs other than \(lqimap\(rq.  Default: \(lqYES\(rq.)
 
 .TP
 .I auth
 Space\-separated list of preferred authentication mechanisms.
-\fBimapsync\fR uses the first mechanism in that list that is also
+\fBInterIMAP\fR uses the first mechanism in that list that is also
 advertised (prefixed with \(lqAUTH=\(rq) in the server's capability list.
 Supported authentication mechanisms are \(lqPLAIN\(rq and \(lqLOGIN\(rq.
 (Default: \(lqPLAIN LOGIN\(rq.)
@@ -288,7 +289,7 @@ Fingerprint of the server certificate in the form
 \fIALGO\fR$\fIDIGEST_HEX\fR, where \fIALGO\fR is the used algorithm
 (default \(lqsha256\(rq).
 Attempting to connect to a server with a non-matching certificate
-fingerprint causes \fBimapsync\fR to abort the connection immediately
+fingerprint causes \fBInterIMAP\fR to abort the connection immediately
 after the SSL/TLS handshake.
 
 .TP
@@ -307,11 +308,11 @@ Authorities, used for server certificate verification.
 .SH KNOWN BUGS AND LIMITATIONS
 
 .IP \[bu]
-Using \fBimapsync\fR on two identical servers with a non-existent or
+Using \fBInterIMAP\fR on two identical servers with a non-existent or
 empty database will duplicate each message due to the absence of
 local/remote UID association.
 .IP \[bu]
-\fBimapsync\fR is single threaded and doesn't use IMAP command
+\fBInterIMAP\fR is single threaded and doesn't use IMAP command
 pipelining.  Synchronization could be boosted up by sending independent
 commands (such as the initial LIST/STATUS command) to each server in
 parallel, and for a given server, by sending independent commands (such
@@ -320,7 +321,7 @@ as flag updates) in a pipeline.
 Because the IMAP protocol doesn't have a specific response code for when
 a message is moved to another mailbox (using the MOVE command from
 [RFC6851] or COPY + STORE + EXPUNGE), moving a messages causes
-\fBimapsync\fR to believe that it was deleted while another one (which
+\fBInterIMAP\fR to believe that it was deleted while another one (which
 is replicated again) was added to the other mailbox in the meantime.
 
 .IP \[bu]
diff --git a/imapsync.sample b/interimap.sample
index 296f766..296f766 100644
--- a/imapsync.sample
+++ b/interimap.sample
diff --git a/imapsync.service b/interimap.service
index 02b4d13..7f2d035 100644
--- a/imapsync.service
+++ b/interimap.service
@@ -1,10 +1,10 @@
 [Unit]
-Description=IMAP-to-IMAP Syncronization service
+Description=Fast two-way synchronization program for QRESYNC-capable IMAP servers
 Wants=network-online.target
 After=network-online.target
 
 [Service]
-ExecStart=/usr/bin/imapsync
+ExecStart=/usr/bin/interimap
 RestartSec=60s
 Restart=always
 
diff --git a/lib/Net/IMAP/Sync.pm b/lib/Net/IMAP/InterIMAP.pm
index 6561a66..26cfbbd 100644
--- a/lib/Net/IMAP/Sync.pm
+++ b/lib/Net/IMAP/InterIMAP.pm
@@ -16,7 +16,7 @@
 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #----------------------------------------------------------------------
 
-package Net::IMAP::Sync v0.0.1;
+package Net::IMAP::InterIMAP v0.0.1;
 use warnings;
 use strict;
 
@@ -195,7 +195,7 @@ our $IMAP_cond;
 our $IMAP_text;
 
 
-# Create a new Net::IMAP::Sync object.  Connect to the server,
+# Create a new Net::IMAP::InterIMAP object.  Connect to the server,
 # upgrade to a secure connection (STARTTLS), LOGIN/AUTHENTICATE if needed, and
 # update the CAPABILITY list.
 # In addition to the %OPTIONS above, valid parameters include:
@@ -384,7 +384,7 @@ sub new($%) {
 }
 
 
-# Log out when the Net::IMAP::Sync object is destroyed.
+# Log out when the Net::IMAP::InterIMAP object is destroyed.
 sub DESTROY($) {
     my $self = shift;
     foreach (qw/STDIN STDOUT/) {